EX-BNS 120-02Z-3G/D 5,0M
| Ordering data | |
|
Product type description
|
EX-BNS 120-02Z-3G/D 5,0M |
| Article number (order number) | 101213462 |
| EAN (European Article Number) | 4,03066E+12 |
| eCl@ss number, version 11.0 | 27-27-24-02 |
| eCl@ss number, version 9.0 | 27-27-24-02 |
| ETIM number, version 7.0 | EC002544 |
| ETIM number, version 6.0 | EC002544 |
| Explosion protection | |
|
Explosion protection: regulations
|
EN IEC 60079-0 |
| EN IEC 60079-15 | |
| EN IEC 60079-31 | |
| Explosion protection zones | 22 |
| 2 | |
| Explosion protection category | 3D |
| 3G | |
| Explosion protection designation | D II 3G Ex nC IIC T6 Gc X |
| D II 3D Ex tc IIIC T80°C Dc X | |
| Manufacturer declaration | Additional simple electrical apparatus (Zone 0 and 20) |
| General data | |
|
Standards
|
EN IEC 60947-5-3 |
| Housing construction form | Cylinder, thread |
| Installation conditions (mechanical) | quasi-flush |
| Enclosure material | Glass-fibre, reinforced thermoplastic |
| Gross weight | 200 g |
| General data - Features | |
|
Short circuit detection
|
Yes |
| Cross-circuit detection | Yes |
| Number of normally closed (NC) | 2 |
| Number of safety contacts | 2 |
| Safety classification | |
|
Standards
|
EN ISO 13849-1 |
| Mission time | 20 Year(s) |
| Safety classification - Safety outputs | |
|
B10D Normally-closed contact (NC)
|
25,000,000 Operations |
| Mechanical data | |
|
Active area
|
front side |
| Actuating element | Magnet |
| Switching distance actuator | Actuating magnet BP 6, Sao: 10 mm |
| Actuating magnet BP 8, Sao: 10 mm | |
| Actuating magnet BP 8, Sar: 22 mm | |
| Actuating magnet BP 10, Sao: 20 mm | |
| Actuating magnet BP 10, Sar: 32 mm | |
| Actuating magnet BP 15 SS, Sao: 20 mm | |
| Actuating magnet BP 15 SS, Sar: 32 mm | |
| Impact energy, maximum | 2 J |
| Direction of motion | Head-on to the active surface |
| Mechanical data - Switching distances according EN IEC 60947-5-3 | |
|
Assured switching distance "ON" Sao
|
10 mm |
| 20 mm | |
| Assured switching distance "OFF" Sar | 22 mm |
| 32 mm | |
| Mechanical data - Connection technique | |
|
Termination
|
Cable |
| Length of cable | 5 m |
| Wire cross-section | 0.25 mm2 |
| Wire cross-section | 23 AWG |
| Material of the Cable mantle | PVC |
| Mechanical data - Dimensions | |
|
ISO thread of the sensor
|
M12 |
| Length of sensor | 38.5 mm |
| Ambient conditions | |
|
Degree of protection
|
IP67 |
| Ambient temperature, minimum | -25 °C |
| Ambient temperature, maximum | +70 °C |
| Storage and transport temperature, minimum | -25 °C |
| Storage and transport temperature, maximum | +70 °C |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g / 11 ms |
| Electrical data | |
|
Switching voltage, maximum
|
100 VAC |
| Switching voltage, maximum | 100 VDC |
| Switching current, maximum | 0.25 A |
| Switching capacity, maximum | 3 W |
| Switching frequency, maximum | 5 Hz |
| Scope of delivery | |
|
Scope of delivery
|
Actuators must be ordered separately. |
| Accessory | |
|
Recommendation (actuator)
|
BP 10 |
| BP 8 | |
| BP 6 | |
| BP 15 SS | |
| Recommended safety switchgear | SRB-E-301ST |
| SRB-E-201LC |
