Category
Online Support
Views history
-
Công tắc giới hạn hành trình loại TV8H 330-11Y-1903
-
Máy bơm nước thải chìm Model: S1.100.125.500.4.62M.S.367.G.N.D.511
-
chổi than LAMPAR LP104, LP107, EG550, ML20
-
Van lấy mẫu hai chỗ ngồi Sesame -The Keofitt SESAME
-
Vỉ trao đổi nhiệt liền khối vật liệu Inox
-
Vỉ trao đổi nhiệt liền khối BHE Brazed Heat Exchanger
-
Dầu máy nén khí Atlas Copco Xtend Duty 20L
-
Vỉ trao đổi nhiệt Clip 3 cho công nghiệp nhỏ
Khóa an toàn: AZM 170-02ZK
Ordering data
| Product type description |
AZM 170-02ZK 24VAC/DC |
| Article number (order number) |
101141641 |
| EAN (European Article Number) |
4030661122939 |
| eCl@ss number, Version 9.0 |
27-27-26-03 |
| eCl@ss number, Version 11.0 |
27-27-26-03 |
Approval - Standards
| Certificates |
BG cULus CCC EAC |
General data
| Standards |
EN 60947-5-1 BG-GS-ET-19 |
| Coding level according to ISO 14119 |
Low |
| Active principle |
electromechanical |
| Enclosure material |
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Material of the contacts, electrical |
Silver |
| Gross weight |
271 g |
General data - Features
| Power to unlock |
Yes |
| Manual release |
Yes |
| Number of actuating directions |
2 |
| Number of auxiliary contacts |
1 |
| Number of safety contacts |
2 |
Safety appraisal
| Standards |
EN ISO 13849-1 |
| Mission Time |
20 Year(s) |
Safety appraisal - Safety outputs
| B10d Normally-closed contact (NC) |
2,000,000 Operations |
Mechanical data
| Mechanical life, minimum |
1,000,000 Operations |
| Clamping force in accordance with ISO14119 Fzh |
1,000 N |
| positive break travel |
11 mm |
| Positive break force, minimum |
17 N |
| Actuating speed, maximum |
2 m/s |
Mechanical data - Connection technique
| Terminal Connector |
IDC method of termination |
| Cable section, minimum |
1 x 0.75 mm² |
| Cable section, maximum |
1 x 1.0 mm², flexible |
Mechanical data - Dimensions
| Length of sensor |
30 mm |
| Width of sensor |
90 mm |
| Height of sensor |
84 mm |
Ambient conditions
| Degree of protection |
IP67 to EN 60529 |
| Ambient temperature, minimum |
-25 °C |
| Ambient temperature, maximum |
+60 °C |
Ambient conditions - Insulation value
| Rated insulation voltage Ui |
250 V |
| Rated impulse withstand voltage Uimp |
4 kV |
Electrical data
| Thermal test current |
6 A |
| Rated control voltage |
24 VAC/DC |
| Required rated short-circuit current to EN 60947-5-1 |
1,000 A |
| Electrical power consumption, maximum |
10 W |
| Switching element |
Opener (NC) |
| Note (Switching element) |
Change-over contact with double break, type Zb or 2 NC contacts, with galvanically separated contact bridges |
| Switching principle |
Creep circuit element |
| Switching frequency |
1,000 /h |
Electrical data - Safety contacts
| Voltage, Utilisation category AC15 |
230 VAC |
| Current, Utilisation category AC-15 |
4 A |
| Voltage, Utilisation category DC13 |
24 VDC |
| Current, Utilisation category DC13 |
2.5 A |
Other data
| Note (applications) |
sliding safety guard removable guard hinged safety guard |
Scope of delivery
| Included in delivery |
Actuators must be ordered separately. |
Notes
| Note (General) |
Individual coding available on request |
| Note (Manual release) |
For manual release using M5 triangular key, available as accessory |
Ordering data
| Product type description |
AZM 170-02ZK 24VAC/DC |
| Article number (order number) |
101141641 |
| EAN (European Article Number) |
4030661122939 |
| eCl@ss number, Version 9.0 |
27-27-26-03 |
| eCl@ss number, Version 11.0 |
27-27-26-03 |
Approval - Standards
| Certificates |
BG cULus CCC EAC |
General data
| Standards |
EN 60947-5-1 BG-GS-ET-19 |
| Coding level according to ISO 14119 |
Low |
| Active principle |
electromechanical |
| Enclosure material |
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Material of the contacts, electrical |
Silver |
| Gross weight |
271 g |
General data - Features
| Power to unlock |
Yes |
| Manual release |
Yes |
| Number of actuating directions |
2 |
| Number of auxiliary contacts |
1 |
| Number of safety contacts |
2 |
Safety appraisal
| Standards |
EN ISO 13849-1 |
| Mission Time |
20 Year(s) |
Safety appraisal - Safety outputs
| B10d Normally-closed contact (NC) |
2,000,000 Operations |
Mechanical data
| Mechanical life, minimum |
1,000,000 Operations |
| Clamping force in accordance with ISO14119 Fzh |
1,000 N |
| positive break travel |
11 mm |
| Positive break force, minimum |
17 N |
| Actuating speed, maximum |
2 m/s |
Mechanical data - Connection technique
| Terminal Connector |
IDC method of termination |
| Cable section, minimum |
1 x 0.75 mm² |
| Cable section, maximum |
1 x 1.0 mm², flexible |
Mechanical data - Dimensions
| Length of sensor |
30 mm |
| Width of sensor |
90 mm |
| Height of sensor |
84 mm |
Ambient conditions
| Degree of protection |
IP67 to EN 60529 |
| Ambient temperature, minimum |
-25 °C |
| Ambient temperature, maximum |
+60 °C |
Ambient conditions - Insulation value
| Rated insulation voltage Ui |
250 V |
| Rated impulse withstand voltage Uimp |
4 kV |
Electrical data
| Thermal test current |
6 A |
| Rated control voltage |
24 VAC/DC |
| Required rated short-circuit current to EN 60947-5-1 |
1,000 A |
| Electrical power consumption, maximum |
10 W |
| Switching element |
Opener (NC) |
| Note (Switching element) |
Change-over contact with double break, type Zb or 2 NC contacts, with galvanically separated contact bridges |
| Switching principle |
Creep circuit element |
| Switching frequency |
1,000 /h |
Electrical data - Safety contacts
| Voltage, Utilisation category AC15 |
230 VAC |
| Current, Utilisation category AC-15 |
4 A |
| Voltage, Utilisation category DC13 |
24 VDC |
| Current, Utilisation category DC13 |
2.5 A |
Other data
| Note (applications) |
sliding safety guard removable guard hinged safety guard |
Scope of delivery
| Included in delivery |
Actuators must be ordered separately. |
Notes
| Note (General) |
Individual coding available on request |
| Note (Manual release) |
For manual release using M5 triangular key, available as accessory |
Partners
