Công tắc Schaltbau Snap Action S804

Online Support

Kinh doanh - O936471118

Sales support - O936471118

Views history

Công tắc Schaltbau Snap Action S804

Specifications

Electrical Data
Contact configuration	SPDT-DB (Form Za) snap-action switch with double-break contacts and 4 terminals
Conv. thermal current I_th EN60947	10 A at T = 85°C
Conv. thermal current I_th UL508	5 A at T = 85°C
Rated insulation voltage U_i EN60947	250 V
Rated insulation voltage U_i UL508	300 V
Pollution degree IEC 60947	PD 3
Pollution degree UL508	PD 3
Rated impulse withstand voltage U_imp	2.5 kV
Utilization category IEC 60947	AC-15, 230 VAC/1.0 A / DC-13, 60 VDC/0.5 A
Utilization category UL508	240 V AC/1.5 A / DC 120 VDC/1.0 A (General Purpose)
IP rating: contacts/terminals	IP40/IP00
Contact material	Silver or gold
Short-circuit protection	10 A gL
Actuators, operating positions
Actuator	Push button
Free position	12.6 ±0.2
Operating position	11.6 ±0.2
Release position	12.1 ±0.2
Total positive opening travel	---
Total travel position	10.6 min.
Movement differential (between operating and release position)	0.5 (typical)
Mechanical data
Front mount	---
Ganging (side mount)	yes, side mount
Vibration resistance	20 g (10 … 500 Hz all directions, without aux. actuator at 0.1 ms max. opening time)
Shock resistance	50 g, half sinus (without aux. actuator at 0.1 ms max. opening time)
Housing material	PC, green transparent
Mechanical endurance	10 million cycles min.
Temperature range	-40 °C ... +85 °C
Note	Data valid for new switches with silver contacts

Công tắc Schaltbau Snap Action S804

Unlike series S800 and S804, Schaltbau’s S814 Series snap-action switches do not possess positive opening operation.

They normally come with silver-plated contacts, but are also available with gold contacts. Due to their stable and low contact resistance over the operating life of most applications, gold contacts are best suited for use in control circuits where low voltage and current ratings are required.

Contact reliability is also achieved by wiping action that provides a self-cleaning of the contacts. When actuated, the contacts of the contact bridge wipe against the fixed contacts. During each operation this wiping action results in the self-cleaning of the contacts. And it is the switch with gold contacts that makes the most of this effect.

Features

Double break contacts: High electrical rating due to solid contact bridge and double-break contacts
Precision switch: High switching accuracy and resistance to shock and vibration
Sealed to: IP40 in accordance with IEC 60529
Contact material: Silver or gold