Hỗ trợ trực tuyến

Schaltbau Snap-action switches, S826 series

Mã sản phẩm
Schaltbau Snap-action switches, S826 series
Giá
Liên Hệ
Nhà sản xuất
SCHALTBAU
Bảo hành
12 tháng
Schaltbau Snap-action switches, S826 series

Specifications

Electrical Data

 

Contact configuration

SPDT-DB (Form Zb) snap-action switch with double-break contacts,
4 terminals, positive opening operation, wiping action, and 2 galvanically isolated contact bridges

Conv. thermal current Ith EN60947

10 A at T = 85°C

Conv. thermal current Ith UL508

10 A at T = 85°C

Rated insulation voltage Ui EN60947

400 V
(except «screw with saddle clamp»: 250 V: PD3 / 400 V: PD2)

Rated insulation voltage Ui UL508

300 V

Pollution degree IEC 60947

PD 3

Pollution degree UL508

PD 3

Rated impulse withstand voltage Uimp

4 kV

Utilization category IEC 60947

AC-15, 230 VAC/1.0 A / DC-13, 110 VDC/0.5 A

Utilization category UL508

AC 240 V / 1 A general purpose

IP rating: contacts/terminals

IP40/IP00

Contact material

Silver or gold

Short-circuit protection

6 A gR (silver only)

Actuators, operating positions

 

Actuator

Push button, roller lever

Free position

8.85 ±0.20

Operating position

6.60 ±0.35

Release position

7.80 ±0.35

Total positive opening travel

5.85

Total travel position

< 5.65

Movement differential (between operating and release position)

1.2 (typical)

Mechanical data

 

Front mount

yes, front mounting by nut retainers M3

Ganging (side mount)

yes, side mount

Vibration resistance

10 g (10 … 500 Hz all directions, without aux. actuator at 0.1 ms max. opening time)

Shock resistance

30 g, half sinus (without aux. actuator at 0.1 ms max. opening time)

Housing material

PC, green transparent

Mechanical endurance

10 million cycles min.

Temperature range

-40 °C ... +85 °C

Note

Data valid for switches with silver contacts.
Data valid for new switches under laboratory conditions and at room temperature, unless otherwise mentioned.


Snap-action switches with positive opening operation
and self-cleaning double-break contacts

S826 Series switches feature galvanically isolated contact bridges that make it possible to control two separate load circuits with independent voltage levels at the same time.
The wiping, double-break contacts ensure high reliability even at low electrical loads. Switches with gold contacts are particularly suitable for low currents and voltages.

Features

  • Positive opening operation: Reliable interruption even after contact welding, in compliance with IEC 60947-5-1, Annex K
  • Double break contacts: High switching accuracy and resistance to shock and vibration
  • Precision switch: High switching accuracy and resistance to shock and vibration
  • Self-cleaning contacts: Constantly low contact resistance ensures high contact reliability over the entire design life of the switch
  • Magnetic blowout: Optional blowout magnets to extinguish the arc at higher DC loads
  • Contact material: Silver or gold

Applications

  • Limit switch for use on machines, doors and plant-controls
  • Switches for driver‘s cab of rail vehicles and control panels in cranes
  • Electromechanical switch for automation tasks
  • Safety switch in control units

Đối Tác

prev
  • Siemens
  • ABB
  • IntensivFilter
  • Schenck
  • đối tác 6
  • Ringspann
  • schaltbau
  • Schmersal
  • Đối tác FPT Smarthome
next